Nibbling Machine
₹100,000.00
In Stock
- This machine is best suited for small batch production or when cost of press tools and dies is prohibitive.
- It enhance quality and productivity by doing ssuch jobs which used to be done by skilled men and hand tools.
- The machine has eliminated expensive trimming dies in many modern workshops. Fabricatiors, Control panel manufacturers, cabinet & vehicle body makers, fan & impeller industry in addition to many others find it a most valuable asset.
- While the capacities indicated below are for mild steel, the machine is often used for many other materials as well.
| No | CAPACITY | PN-3 Mild Steel 45 Kg/mm’ | PN-5 Mild Steel 45 Kg/mm7 | PN-8 Mild Steel 45 Kg/mm’ | ||
|---|---|---|---|---|---|---|
| 1 | SHEARING STRAIGHT CUTTING | From the edge Inside with starting hole Sheet without Starting hole | mm mm mm | 3.2 3.2 2.5 | M- 5 5 4 | -Z- 8 8 6 |
| 2 | NIBBLING | From the edge Inside with starting hole Sheet without Starting hole | mm mm mm | 2.5 2.5 2 | 4 4 3 | 6 6 4 |
| 3 | RECTANGULAR NOTCHING | Sheet thickness / width of notch | mm | 2/8 | 3/10 | 4/12 |
| 4 | FIGURE CUTTING SLOT | Sheet thickness Sheet thickness / width of slot | mm | 2 | 3 | 9 |
| 5 | CUTTING | Sheet thickness Sheet thickness / width of slot | mm | 2.5/8 | 4/10 | 5/10 |
| 6 | LOUVER CUTTING | Sheet thickness Sheet thickness / depth of bead | mm | 225 | 3 | 4 |
| 7 | BEADING | Sheet thickness Sheet thickness / depth of bead | mm | 2/4 | 2.5/5 | 3/6 |
| 8 | FOLDING | Sheet thickness / depth of fold | mm | 2/6 | 2.5/8 | 3/10 |
| 9 | FLANGING | Sheet thickness / height of flanqe | mm | 2/8 | 3/12 | 3/15 |
| 10 | PUNCHING | Sheet thickness | mm | 1.5 | 2.5 | 3.0 |
| 11 | CIRCLE CUTTING OUTSIDE/INSIDE | Sheet thickness | mm | 2 | 3 | 5 |
- Complete electricals,
- a set of straight cutting tools with the holders,
- necessary keys, spanners for the operation of machine,
- feele r gauge
- & operation manual
- Shearing
- Rectangular notching
- Universal nibbling
- Slot cutting
- Louver cutting
- Beading
- Folding
- Flanging
- Large hole punching
- Inner circle cutting
- This machine is best suited for small batch production or when cost of press tools and dies is prohibitive.
- It enhance quality and productivity by doing ssuch jobs which used to be done by skilled men and hand tools.
- The machine has eliminated expensive trimming dies in many modern workshops. Fabricatiors, Control panel manufacturers,cabinet
- vehicle body makers, fan & impeller industry in addition to many others find it a most valuable asset.
- While the capacities indicated below are for mild steel, the machine is often used for many other materials as well.
