Inverters
₹75,000.00
In Stock
It is multi-system welding unit having the three most common welding methods in the same package. It is based on the most up-to-date technology in the welding field. Many different auxiliary functions simplyfy the work of the welder and increase the productivity of his work. It is most suitable where a job demands a continuous change of welding method. The following different facilities are provided in one package
| POWER SOURCE | MODEL | INV-500 |
|---|---|---|
| Static Characteristics | Type | Constant Potential |
| Input Supply | ||
| Voltage | V | 380-415 |
| Phase | Nos. | 3 |
| Frequency | Hz | 50-60 |
| Welding Current Range | A/V | 10/10 – 500/40 |
| Rating 100% Duty Cycle | KVA | 22 |
| Open Circuit Voltage | V | 80 |
| Maximum Input Current | Amps | 28 |
| Load Ability @ 100% | Amps | 390 |
| Load Ability @ 60% | Amps | 500 |
| Cooling Type | Forced Air Cooling | |
| Insulation | Class | F |
| WIRE FEEDER | MODEL | FEEDINV-500 |
|---|---|---|
| Wire Diameter | ||
| Wire Drive Motor | Type | Permanent Magnet DC MOTOR |
| Drive System | Type | 2 – Roll Quick Release |
| Wire Feed Speed | m/min | 0 to 20 |
| TORCH | MODEL | KD-36 |
|---|---|---|
| Rated current at 100% Duty Cycle Co 2 | Amps | 400 |
| Cable Hose Length | Mtr. | 3 |
| Cooling | Type | Gas/Water |
| POWER SOURCE | L | W | H |
|---|---|---|---|
| INVERTOR | 760 mm | 465 mm | 610 mm |
| WIRE FEEDER UNIT | 535 mm | 235 mm | 330 mm |
- A coolant pump fitted on a tank,
- Diamond Dresser 2 nos.,
- Oil can, Dead Center 2 nos.
- Tool kit.
-
Additional attachment extra cost
- Internal Grinding Attachment,
- Balancing Stand,
- Balancing Mandrel,
- Three Points Steady Rest,
- Two points Steady Rest,
- Radius Truing Device,
- Spare wheel Flange,
- Independent Four Jaws Chuck,
- Magnetic Coolant Pump,
- Grinding Gauge.
- Co2 Regulator cum Flow Meter
- Helmet with glass
- Pair of hand Gloves
- Wire Brush
- Apron & Spray
