Heavy Duty All Geared Lathe Machine
₹150,000.00
In Stock
The spindle is driven, either by foot power from a treadle and flywheel or by a belt or gear drive to a power source. In most modern lathes this power source is an integral electric motor, often either in the headstock, to the left of the headstock, or beneath the headstock, concealed in the stand.
Model | HAL-614/2 | HAL-816/2 | HAL-1018/2 | HAL-1220 | HAL-1422 |
---|---|---|---|---|---|
Length of bed | 61/2 Ft. | 81/2 Ft. | 101/2 Ft. | 12 Ft. | 14 Ft. |
Width of bed | 375 MM | 375 MM | 450 MM | 500 MM | 550 MM |
Height of Center | 300 MM | 300 MM | 400 MM | 450 MM | 550 MM |
Swing Over Bed | 600 MM | 600 MM | 800 MM | 900 MM | 1000 MM |
Swing Over Cross Slide | 325 MM | 325 MM | 530 MM | 600 MM | 630 MM |
Swing In gap | 865 MM | 865 MM | 12000 MM | 1300 MM | 1400 MM |
Admit Between Center | 100 MM | 1500 MM | 200 MM | 2500 MM | 3000 MM |
NO’s of Spindle Speeds | 8 | 8 | 9 | 9 | 8 |
RPM Range | 30-720 | 30-720 | 30-720 | 15-450 | 30-720 |
Spindle Hollow | 65 MM | 65 MM | 90 MM | 103 MM | 103 MM |
Metric Threads | 1-14 | 1-14 | 1-14 | 1-14 | 1-14 |
With Worth Threads TPI | 2-30 | 2-30 | 2-30 | 2-30 | 2-30 |
No of Feeds | 30 | 30 | 30 | 30 | 30 |
Electic Motor RPM | 3*1440 | 3*1440 | 5*1440 | 5*1440 | 7.5*1440 |
- Face Plate(One)
- Chuck Plate(one)
- Centers(Two center adapter(One)
- Stationery steady(One)
- Follow Rest Assembly(One)
- Set of 22 change
- Gears (One)
- Motor Plate (One)
- Electric Motor
- Starter or Electric Coolant Pump
- 4jaw independent chuck
- 3jaw self centering chuck
- Gears to cut metric threads
- Taper turning attachment
- Tool post grinder & Double Gap or Triple Gap etc.
- Oil country
- Steel & paper mills
- Power plantss
- Ship building
- Mining and textile industries