Drill Machines Manufacturer

Pillar Drill Machine

Pillar Drill Machine

30,000.00

In Stock

  • AMotor Pulley
  • Tapper Drift
  • Manual Book
  • Drill-bit angle gauge

Order by Phone
+91-9831029247
Shipping Information Usually dispatched With In business days
 

 Specification  Pillar Drill Machine HPD – 20
 Tilting working table  Upto 360°
 Drilling capacity  20 mm
 Pillar Diameter  74.30 mm
 Spindle nose to table distance  650 mm
 Distance from spindle nose to base distance  900 mm
 Distance from spindle center to pillar surface  200 mm ( MAX )
 Table Travel  200 mm
 Taper in spindle  MT -2
 Number of speed  8 Speed
 Range of Speed (RPM)  80 to 3500
 Table Size (in mm)  260 x 260
 Base size (Machined Area mm)  470 x 320
 Overall Base Size (in mm)  490 x 310
 Spindle Travel  130 mm
 Pillar Length  1170 mm
 Overall height with pulley guard  1420 mm
 V-Belt section  A – 44″
 Weight (Approx.)  110 kg.
 Motor1440 RPM 3 Phase440 volts  0.5 HP
 Shipping Wooden Case Inner Size LxWxH
(in mm)
 660x380x1140 mm


 Specification  Pillar Drill Machine HPD – 25
 Tilting working table  FIXED
 Drilling capacity  25 mm
 Pillar Diameter  92 mm
 Spindle nose to table distance  660 mm
 Distance from spindle nose to base distance  1045 mm
 Distance from spindle center to pillar surface  250 mm ( MAX )
 Table Travel  480 mm
 Taper in spindle  MT – 3
 Number of speed  8 Speed
 Range of Speed (RPM)  130 to 2600
 Table Size (in mm)  330 x 330
 Base size (Machined Area mm)  365 x 575
 Overall Base Size (in mm)  370 x 580
 Spindle Travel  180 mm
 Pillar Length  1410 mm
 Overall height with pulley guard  1730 mm
 V-Belt section  B – 52″
 Weight (Approx.)  225 kg.
 Motor1440 RPM 3 Phase440 volts  1 HP
 Shipping Wooden Case Inner Size LxWxH
(in mm)
 850x450x1770 mm


 Specification  Pillar Drill Machine HPD – 40
 Tilting working table  FIXED
 Drilling capacity  40 mm
 Pillar Diameter  135 mm
 Spindle nose to table distance  495 mm
 Distance from spindle nose to base distance  1000 mm
 Auto feed speed (applies to PSL-40A only) 0.04 or 0.08
 Distance from spindle center to pillar surface  380 mm ( MAX )
 Table Travel 500 mm
 Taper in spindle  MT – 4
 Number of speed 8 Speed
 Range of Speed (RPM)  60 to 2000
 Table Size (in mm)  490 x 490
 Base size (Machined Area mm)  820 x 490
 Overall Base Size (in mm)  825 x 495
 Spindle Travel  250 mm
 Pillar Length  1475 mm
 Overall height with pulley guard  1840 mm
 V-Belt section  B – 74″
 Weight (Approx.)  500 kg.
 Motor1440 RPM 3 Phase440 volts  2 HP
 Shipping Wooden Case Inner Size LxWxH
(in mm)
 1200x540x1880 mm
  • AMotor Pulley
  • Tapper Drift
  • Manual Book
  • Drill-bit angle gauge
  • Electric Motor
  • R & F Switch
  • Drill Chuck * Arbour / Slive
  • Key-way Compound Slide
  • Tool Rooms
  • Educational Institutes
  • Workshops
  • Rolling Mills Etc
  • Small & Medium Scale Industries
  • Fabrication Workshops